Franklin Fueling Incon 10' Digital Inventory Control Probe with Head Mounted Vibration Motor, Bottom Mount Installation, UL/cUL Listed, ATEX, IECEx Approval, for 2" to 4" Risers. Digital inventory and leak detection probes provide accurate tank level monitoring and reporting with optional leak detection capabilities. These probes employ digital communications and magnetostrictive position measurement technology for highly accurate tank readings.
INVENTORY & LEAK DETECTION PROBES The advanced capabilities of digital probes provide you with tank leak detection with fast and simple installation and setup. Pair with an EVO™ Series ATG and float kit for accurate tank level measurement.
Operation
An electromagnetic field is created inside the probe head and forms around a long waveguide within the probe shaft when position measurements are taken. The electromagnetic field interacts with the magnetic field of the float(s) and produces a shock wave in the waveguide that travels at a known speed. When the shock wave is detected at the probe head, the probe creates a signal that corresponds precisely to the product level. Product expansion calculations are enabled by temperature sensors that are located at various points in the probe shaft.
Inventory Control
- • Precision product and water level measurement.
Leak Detection Upgrade
- • Tank level measurement plus tank leak detection testing.
- • Simple Installation & Setup
- • Bottom mount installation capability, automated setup, and screw-in electrical connector make for fast probe installation.
Higher Accuracy
- • A vibration motor integrated into probe head pulses every 5 minutes to reduce the effects of stiction on level reading and leak detection, providing readings with higher accuracy.
Applications
Digital probes feature exceptional linearity, resolution, and stability, and are used in underground and aboveground storage tanks. Two types of probes are available for the following applications:
- • The leak detection probes are typically used for underground storage tanks and petroleum applications when static or SCALD leak detection is required.
- • The inventory control probes are typically used for aboveground storage tanks, chemical or oil waste, or underground storage tanks that do not require in-tank leak detection.
Specifications
- • Operating temperature: -40° to 140 °F (-40° to 60 °C)
- • Storage temperature: -40° to 158 °F (-40° to 70 °C)
- • Non-linearity: ±0.025% of full scale
- • Repeatability: ±0.001"
- • Temperature sensors: 5 thermistors located in the shaft
- • Temperature resolution: ±0.02 °F (±0.01 °C)
- • Probe pigtail: 10' long three conductor cables with shields and polyurethane jacket
- • Compatible with up to three floats for product, water, phase separation detection, or density measurement.
- • Compatible with Franklin Fueling Systems tank gauges including: EVO™ Series, TS-5, TS-550, TS-5000, Colibri®, TS-1001/2011/750/504/508